Wilwood Brakes Brake Caliper - 120-9333
Color
Natural
Compatibility
11-3/4 Inch X 1 Inch Rotor
Condition
New
Disc Brake Pad Material
No Disc Brake Pad
Finish
Bare
Includes Mounting Hardware
No
Material
Iron
Mounting Type
Floating
Number of Pistons
1
Piston Size (IN)
2 Inch
Quantity
Single
Share this page
Wilwood Brakes Brake Caliper
Brake Caliper; GM Metric; Floating Mount; Single 2.00 Inch Piston Caliper; Use With D154 Brake Pads; Use With 11.75 Inch X 1.00 Inch Rotor; Bare; Iron; Single Caliper
MPN: 1209333
These all new cast, not rebuilt iron calipers are bolt-on replacements for 1978 and later GM Metric calipers widely used in "Spec" racing categories and low cost disc brake conversions. Wilwood iron GM Metric calipers combine new part quality with modern machining precision. There are two piston size options to assist builders with properly building static bias into a car. Previously, builders using the metric calipers generally had to mount the same size calipers on all four wheels. This drastically limited the tuning options and often created front to rear bias ratios that were not conducive to good handling and stability under hard braking. Some builders, and other brake suppliers, chose to offer re-machined OE calipers to provide a bias tuning option. Unfortunately, re-machining a used casting that was never designed for the larger bore size, can create real compromises in strength, reliability, and performance. To address these needs, Wilwood has tooled two separate castings that are fitted with either 2.75 Inch or 2.00 Inch stainless steel pistons and high temperature bore seals. Each casting is designed specific for its intended bore size. The calipers are strong and precise, without unnecessary added weight from oversized castings. The stainless steel pistons resist corrosion while helping to slow the heat transfer from the pads. The high temperature seals provide long service life when used in hard braking applications and maintain their resilience to provide positive piston retraction on release. In addition to the optional piston sizes, two models are available with slide pin vibration dampers installed to help reduce rattle and other noise.
Condition: New
Recommended Use: Street/ Racing
Compatibility: 11-3/4 Inch X 1 Inch Rotor
Mounting Type: Floating
Number of Pistons: 1
Piston Size (IN): 2 Inch
With Disc Brake Pads: No
Disc Brake Pad Material: No Disc Brake Pad
Finish: Bare
Color: Natural
Material: Iron
Includes Mounting Hardware: No
Quantity: Single
Features
- Calipers Combine New Part Quality With Modern Machining Precision
- Calipers Are Strong And Precise, Without Unnecessary Added Weight From Oversized Castings
- Stainless Steel Pistons Resist Corrosion While Helping To Slow The Heat Transfer From The Pads
- High Temperature Seals Provide Long Service Life When Used In Hard Braking Applications And Maintain Their Resilience To Provide Positive Piston Retraction On Release
- No Supplier Warranty
Specifications of Wilwood Brakes Brake Caliper - 120-9333 | |
Color | Natural |
Compatibility | 11-3/4 Inch X 1 Inch Rotor |
Condition | New |
Disc Brake Pad Material | No Disc Brake Pad |
Finish | Bare |
Includes Mounting Hardware | No |
Material | Iron |
Mounting Type | Floating |
Number of Pistons | 1 |
Piston Size (IN) | 2 Inch |
Quantity | Single |
Recommended Use | Street/ Racing |
With Disc Brake Pads | No |
No questions found. Be the first?
Reviews for Wilwood Brakes Brake Caliper - 120-9333(0)
There are no reviews for this product.