Wilwood Brakes Brake Caliper - 120-14375
Color
Gray
Compatibility
10 Inch X 0.38 Inch Rotor
Condition
New
Finish
Type III Hard Anodized
Includes Mounting Hardware
No
Material
Aluminum
Mounting Type
Lug Mount
Number of Pistons
2
Piston Size (IN)
1-3/4 Inch
Quantity
Single
Recommended Use
Racing
Share this page
Wilwood Brakes Brake Caliper
Brake Caliper; WLD-20 Series; 2 Piston Caliper/ 1-3/4 Inch; Use With Wilwood 5214 Brake Pads; Use With 10 Inch X 0.38 Inch Rotor; Type III Hard Anodized; Aluminum
MPN: 12014375
WLD-20 racing calipers provide the ultimate in strength, weight savings, and high efficiency brake clamping for F/F and all other formula category road race vehicles configured for use with the traditional LD20 lug mount style calipers. The calipers feature a high strength, light-weight 2.3 Pound forged aluminum body fitted with machined stainless steel pistons in the standard WLD20 model, or heat-blocking Thermlock® pistons in the WLD20/ST models. All WDL20 series calipers utilize the same mounting centers, height and offset as the traditional LD20 calipers. The calipers accept Wilwood type 5214 brake pads, or any brake pad made to fit the original LD20 models.
Condition: New
Recommended Use: Racing
Compatibility: 10 Inch X 0.38 Inch Rotor
Mounting Type: Lug Mount
Number of Pistons: 2
Piston Size (IN): 1-3/4 Inch
With Disc Brake Pads: Yes
Finish: Type III Hard Anodized
Color: Gray
Material: Aluminum
Includes Mounting Hardware: No
Quantity: Single
Features
- Retains Original LD-20 Mount Centers, Height And Offset
- High Strength, Lightweight 2.3 Pound Forged Aluminum Body With Hard-Coat Anodized Finish
- WLD-20 Base Model Uses Stainless Steel Pistons
- WLD-20/ST Model Uses Thermlock® Pistons To Reduce Heat Transfer From The Pads Into The Caliper Body, Fluid And Seals
- All Models Feature Internal Seal-In-Bore Design With High-Temperature Square Section Seals
- Internal Fluid Transfer With Single Screw Bleeding
- Accepts Wilwood-Type 5214 Or Any Brake Pads Made For LD-20 Calipers
- 3/8-24 Inlet Port To Accommodate Banjo Or Straight Union Inlet Fittings
- No Supplier Warranty
Specifications of Wilwood Brakes Brake Caliper - 120-14375 | |
Color | Gray |
Compatibility | 10 Inch X 0.38 Inch Rotor |
Condition | New |
Finish | Type III Hard Anodized |
Includes Mounting Hardware | No |
Material | Aluminum |
Mounting Type | Lug Mount |
Number of Pistons | 2 |
Piston Size (IN) | 1-3/4 Inch |
Quantity | Single |
Recommended Use | Racing |
With Disc Brake Pads | Yes |
No questions found. Be the first?
Reviews for Wilwood Brakes Brake Caliper - 120-14375(0)
There are no reviews for this product.