Taylor Cable Spark Plug Wire Set 86072
Assembled
Yes
Color
Black
Conductor Type
Ferrite Spiral Wound Core
Diameter (MM)
8.2 Millimeter
Distributor Boot Color
Black
Distributor Boot Material
Silicone
Distributor Terminal Ends
Male/ HEI
Number Of Wires
9
RFI Suppression
Yes
Spark Plug Boot Color
Black
Spark Plug Boot Ends
135 Degree
Share this page
Taylor Cable Spark Plug Wire Set
Spark Plug Wire Set; ThunderVolt 8.2 Sleeved Race; Pre Assembled; Black; 8.2 Millimeter Diameter; Silicone; Ferrite Spiral Wound Core; 135 Degree Spark Plug Boot; HEI Distributor Boot; 40 Ohms Per Foot Resistance; Without Wire Separators
MPN: 86072
Taylor Cable designed the ThunderVolt Sleeved Race Wire to deliver optimum performance for use in open wheel-body racing for additional heat protection, strength and durability. High temperature Double-Layer Silicone Impregnated Fiberglass Sleeving adds 8,000 Volt of additional insulation, while resisting heat, oil, abrasion and is easily cleaned to maintain its vibrant color finish. Utilizes Taylor’s 8.2 Millimeter diameter 100 Percent Silicone 2-layer Jacketed Ignition Wire which eliminates cracking and voltage loss for greater reliability while extending the wire life. Features Taylor’s ThunderVolt 40 Ohm Per Feet Ferrite Spiral Wound Core Conductor that delivers the best spark energy available today. Improves power, idle, and fuel efficiency while suppressing Electro Magnetic (EMI) and Radio Frequency Interference (RFI).
Assembled: Yes
Diameter (MM): 8.2 Millimeter
Wire Material: Silicone
Color: Black
Number Of Wires: 9
Distributor Boot Color: Black
Distributor Boot Material: Silicone
Distributor Terminal Ends: Male/ HEI
Spark Plug Boot Color: Black
Spark Plug Boot Material: Silicone
Spark Plug Boot Ends: 135 Degree
Conductor Type: Ferrite Spiral Wound Core
Wire Resistance: 40 Ohms Per Foot Resistance
RFI Suppression: Yes
Features
- Dyno Test Proven Shows Significant Gains In Horsepower And Torque
- Works In Conjunction With Most Brands Of Ignition Systems, On-Board Computers, Ignition Controls, And Other Various Electronic Components
- High Temperature Black Silicone Boots Provide Maximum Heat Protection And Features Taylor’s Double Spring Locking Stainless Steel Terminals For Secure, Vibration Proof Connections
- Shrink Sleeving At Each Boot End Completes The Wire To Boot Sealing
- Each Wire Features Respective Cylinder Number Tags To Simplify Installation And Ensure Correct Firing Order
- Limited 90 Day Warranty
| Specifications of Taylor Cable Spark Plug Wire Set 86072 | |
| Assembled | Yes |
| Color | Black |
| Conductor Type | Ferrite Spiral Wound Core |
| Diameter (MM) | 8.2 Millimeter |
| Distributor Boot Color | Black |
| Distributor Boot Material | Silicone |
| Distributor Terminal Ends | Male/ HEI |
| Number Of Wires | 9 |
| RFI Suppression | Yes |
| Spark Plug Boot Color | Black |
| Spark Plug Boot Ends | 135 Degree |
| Spark Plug Boot Material | Silicone |
| Wire Material | Silicone |
| Wire Resistance | 40 Ohms Per Foot Resistance |
No questions found. Be the first?
Reviews for Taylor Cable Spark Plug Wire Set 86072(0)
There are no reviews for this product.