Stop Tech/ Power Slot Brake Rotor - 128.61087L
Design
1-Piece
Disc To Hat Bolt Circle (IN)
Not Applicable
Disc To Hat Bolt Circle (MM)
Not Applicable
Disc Type
Drilled
Finish
Electro Coated
Height (IN)
1.386 Inch
Height (MM)
35.2 Millimeter
Hub Bore Size
70.7 Millimeter
Material
Cast Iron
Nominal Thickness (IN)
0.752 Inch
Nominal Thickness (MM)
19.1 Millimeter
Share this page
Stop Tech/ Power Slot Brake Rotor
Brake Rotor; SportStop ® Drilled; Silver E-Coated; Alloy; Single
MPN: 12861087L
Excessive heat can cause resins in your brake pad to vaporize or outgas. As the brake pad wears, the used friction material turns into a fine dust. This boundary layer of heat, gas and dust builds up between the pad and rotor surfaces and inhibits performance. Powerslot rotors are finished in a durable black E-coat on the hat, edges and internal vanes to prevent corrosion. The braking surfaces are left in a bare iron finish to improve brake pad bed-in. A combination of stoptech high performance or posiquiet brake pads and power slot slotted rotors will deliver superior, reliable braking for virtually all automotive, truck and SUV applications, even under hard driving and severe duty conditions. But for our most demanding customers such as police pursuit vehicles and club racers, we also suggest Powerslot Cryo rotors.
Recommended Use: Performance
Design: 1-Piece
Disc Type: Drilled
Finish: Electro Coated
Material: Cast Iron
Outer Diameter (IN): 11.811 Inch
Outer Diameter (MM): 300 Millimeter
Height (IN): 1.386 Inch
Height (MM): 35.2 Millimeter
Nominal Thickness (IN): 0.752 Inch
Nominal Thickness (MM): 19.1 Millimeter
Hub Bore Size: 70.7 Millimeter
Wheel Bolt Circle (IN): 5 X 4.5 Inch
Wheel Bolt Circle (MM): 5 X 114.3 Millimeter
Disc To Hat Bolt Circle (IN): Not Applicable
Disc To Hat Bolt Circle (MM): Not Applicable
Quantity: Single
Features
- Premium Quality, Larger Diameter PowerSlot Rotor With Vac-U-Slot Technology
- Exclusive Vac-U-Slots Are Machined Into The Rotor And Help Evacuate Gasses And Dust, Shed Heat, Also Keep The Brake Pad Surface Clean In Wet And Raining Conditions
- Vac-U-Slot Helps Push Water Off The Braking Surface For Better Stopping Power
- Relocates The Factory Brake Caliper For Increased Braking Effectiveness. Rotors Are Cadmium Plated To Military Specifications To Protect Against Rust
- No Special Brake Pad Sizes Required
- Maintains 96 Percent Active Breaking Area. 100 Percent Bolt-On Mounting, No Cutting Or Drilling
- Complete Hardware Kit And Comprehensive Installation Instructions Included
- Limited 3 Year Warranty
| Specifications of Stop Tech/ Power Slot Brake Rotor - 128.61087L | |
| Design | 1-Piece |
| Disc To Hat Bolt Circle (IN) | Not Applicable |
| Disc To Hat Bolt Circle (MM) | Not Applicable |
| Disc Type | Drilled |
| Finish | Electro Coated |
| Height (IN) | 1.386 Inch |
| Height (MM) | 35.2 Millimeter |
| Hub Bore Size | 70.7 Millimeter |
| Material | Cast Iron |
| Nominal Thickness (IN) | 0.752 Inch |
| Nominal Thickness (MM) | 19.1 Millimeter |
| Outer Diameter (IN) | 11.811 Inch |
| Outer Diameter (MM) | 300 Millimeter |
| Quantity | Single |
| Recommended Use | Performance |
| Wheel Bolt Circle (IN) | 5 X 4.5 Inch |
| Wheel Bolt Circle (MM) | 5 X 114.3 Millimeter |
2005 Ford Mustang
2006 Ford Mustang
2007 Ford Mustang
2008 Ford Mustang
2009 Ford Mustang
2010 Ford Mustang
2011 Ford Mustang
2012 Ford Mustang
2013 Ford Mustang
2014 Ford Mustang
2006 Ford Mustang
2007 Ford Mustang
2008 Ford Mustang
2009 Ford Mustang
2010 Ford Mustang
2011 Ford Mustang
2012 Ford Mustang
2013 Ford Mustang
2014 Ford Mustang
No questions found. Be the first?
Related Products
Authorized Dealer
Authorized Dealer
Authorized Dealer
Recently Viewed
Reviews for Stop Tech/ Power Slot Brake Rotor - 128.61087L(0)
There are no reviews for this product.
