Skunk 2 Cold Air Intake - 343-12-0050
Bent Type
J-Bend
Estimated Install Time (Hours)
1
Filter Color
Red
Protection Type
Air Box
Recommended Use
Racing
Tube Color
Black
Tube Finish
Matte
Tube Material
Polymer Plastic
Share this page
Skunk 2 Cold Air Intake
Cold Air Intake; Powerbox; Polymer Plastic; 6.8 Inch Diameter Cone Filter; With Air Box; With Velocity Stack
MPN: 343120050
Skunk2’s Cold-Air Intake is manufactured from molded polymer plastic for superior intake air insulation when compared to aluminum as well as for a smooth, continuous taper. When compared to aluminum, the thicker polymer material results in a superior thermal barrier and lower intake air temperatures drastically reducing heat soak in comparison to other intakes. For optimal power, the BRZ/FRS Cold Air Intake draws in the coldest and highest pressure air available. This is achieved by placing the Ram Air Box’s inlet duct in front of the radiator where the most clean and cold air is found. The Ram Air Box is manufactured from cross-linked polymer to provide superior thermal rejection and structural strength as the air filter’s housing. The Composite Velocity Stack utilizes race proven technology and is engineered to optimize air flow while maximizing velocity. The glass fiber nylon structure imparts high impact strength with low thermal conductivity to significantly reduce heat soak and air intake temperatures. The design also incorporates dimples on the entry surface to extend the boundary layer into the mouth. The dimples increase the effective cross sectional flow area causing higher total mass air flow compared to other velocity stacks. The Throttle Body Velocity Tube is manufactured from cross-linked polymer for thermal isolation which again reduces heat and heat soak.
Recommended Use: Racing
Bent Type: J-Bend
Tube Finish: Matte
Tube Color: Black
Tube Material: Polymer Plastic
Filter Color: Red
Protection Type: Air Box
Estimated Install Time (Hours): 1
Features
- Manufactured From Molded Polymer Plastic For Superior Intake Air Insulation
- Cold Air Intake Draws In The Coldest And Highest Pressure Air Available
- Ram Air Box Is Manufactured From Cross-Linked Polymer To Provide Superior Thermal Rejection And Structural Strength As The Air Filter’s Housing
- The Composite Velocity Stack Utilizes Race Proven Technology And Is Engineered To Optimize Air Flow While Maximizing Velocity
- The Glass Fiber Nylon Structure Imparts High Impact Strength With Low Thermal Conductivity To Significantly Reduce Heat Soak And Air Intake Temperatures
- Cold Air Intake Uses A Massive 6.8 Inch Diameter Double Cone Filter Element Which Will Allow For Larger Dust Holding Capacities
- The Cone Filter Is Also Washable Which Will Avoid Future Expenses On A Replacement Filter
- Limited 1 Year Warranty
Specifications of Skunk 2 Cold Air Intake - 343-12-0050 | |
Bent Type | J-Bend |
Estimated Install Time (Hours) | 1 |
Filter Color | Red |
Protection Type | Air Box |
Recommended Use | Racing |
Tube Color | Black |
Tube Finish | Matte |
Tube Material | Polymer Plastic |
2013 Scion FR-S
2014 Scion FR-S
2014 Scion FR-S
2013 Subaru BRZ
2014 Subaru BRZ
2014 Subaru BRZ
No questions found. Be the first?
Reviews for Skunk 2 Cold Air Intake - 343-12-0050(0)
There are no reviews for this product.