PowerBond by Dayco Harmonic Balancer - PB1203SS
Balance Style
External
Degree Markings
Yes
Degree Markings Range
OEM
Engine Compatibility
OEM
Material
Steel
Outside Diameter (IN)
6.497 Inch
Safety Rating
SFI 18.1
Thickness (IN)
3.182 Inch
Share this page
PowerBond by Dayco Harmonic Balancer
Harmonic Balancer; Race Performance; 6.50 Inch Overall Outside Diameter/ 1.88 Inch Nose Outside Diameter; External; Steel; SFI Certified
MPN: PB1203SS
The PowerBond race series brings the advantages of bonded balancers to high revving and high horsepower street/race applications where an SFI approved balancer is required. PowerBond Race Series balancers have been tested beyond 21,000 RPM without failure. Every PowerBond race series balancer features a precision CNC machined AISI 1045 forged steel hub bonded to an equally strong steel inertia ring. Advanced design mean that race series balancers are very light for an all steel product. In most cases they are only marginally heavier than the original cast iron balancer and generally much lighter than other all steel balancers on the market. The steel inertia ring on the race series models is positively protected against forward and backward movement. PowerBond uses our Race Series high pressure, low cure that features a natural rubber developed in our laboratory. Every model has easy to read computer etched timing marks. All PowerBond race series balancers meet SFI specification 18.1.
Engine Compatibility: OEM
Balance Style: External
Outside Diameter (IN): 6.497 Inch
Thickness (IN): 3.182 Inch
Material: Steel
Safety Rating: SFI 18.1
Degree Markings: Yes
Degree Markings Range: OEM
Features
- Features Precision CNC Machined AISI 1045 Forged Steel Hub Bonded To An Equally Strong Steel Inertia Ring
- Very Light For All Steel Product
- The Steel Inertia Ring On The Race Series Models Is Positively Protected Against Forward And Backward Movement
- Every Model Has Easy To Read Computer Etched Timing Marks
- Meet's SFI Specification 18.1
- Limited 2 Year Warranty
Specifications of PowerBond by Dayco Harmonic Balancer - PB1203SS | |
Balance Style | External |
Degree Markings | Yes |
Degree Markings Range | OEM |
Engine Compatibility | OEM |
Material | Steel |
Outside Diameter (IN) | 6.497 Inch |
Safety Rating | SFI 18.1 |
Thickness (IN) | 3.182 Inch |
1968 Ford Bronco
1969 Ford Bronco
1969 Ford Bronco
1968 Ford Country Sedan
1969 Ford Country Sedan
1969 Ford Country Sedan
1968 Ford Country Squire
1969 Ford Country Squire
1969 Ford Country Squire
1968 Ford Custom
1969 Ford Custom
1969 Ford Custom
1968 Ford Custom 500
1969 Ford Custom 500
1969 Ford Custom 500
1969-1969 Ford E-100 Econoline
1969 Ford E-100 Econoline
1969-1969 Ford E-200 Econoline
1969 Ford E-200 Econoline
1969-1969 Ford E-300 Econoline
1969 Ford E-300 Econoline
1968 Ford Fairlane
1969 Ford Fairlane
1969 Ford Fairlane
1968 Ford Falcon
1969 Ford Falcon
1969 Ford Falcon
1968 Ford Galaxie 500
1969 Ford Galaxie 500
1969 Ford Galaxie 500
1968 Ford LTD
1969 Ford LTD
1969 Ford LTD
1968 Ford Mustang
1969 Ford Mustang
1969 Ford Mustang
1968 Ford Ranch Wagon
1969 Ford Ranch Wagon
1969 Ford Ranch Wagon
1968 Ford Ranchero
1969 Ford Ranchero
1969 Ford Ranchero
1968 Ford Torino
1969 Ford Torino
1969 Ford Torino
1968 Mercury Comet
1969 Mercury Comet
1969 Mercury Comet
1968 Mercury Cougar
1969 Mercury Cougar
1969 Mercury Cougar
1968 Mercury Cyclone
1969 Mercury Cyclone
1969 Mercury Cyclone
1968 Mercury Montego
1969 Mercury Montego
1969 Mercury Montego
No questions found. Be the first?
Reviews for PowerBond by Dayco Harmonic Balancer - PB1203SS(0)
There are no reviews for this product.