Moroso Performance Oil Filter - 22470
Anti-Drain Back Valve
Yes
Color
Silver
Estimated Install Time (Hours)
0.25
Filter Bypass Relief Valve
No
Gasket Material
Nitrile Rubber
Height (IN)
5-1/4 Inch
Material
Steel Mesh
Micron Rating
27
Type
Canister
Share this page
Moroso Performance Oil Filter
Oil Filter; Engine Oil Filter; Steel Mesh; 27 Microns; Canister
MPN: 22470
After many Years of designing and testing racing oil systems and related components, we’ve determined what’s most important to oil filtration. Many filter manufacturers stress the importance of filtering the smallest particles out of your engine’s oil, with references to "Micron Ratings" of 10 or less for a filter’s efficiency. With the help of research performed by filtration technology experts, Moroso engineers have determined that particles smaller than 20 Microns in diameter are not large enough to produce engine wear. Furthermore, we’ve found that filters with extremely low micron ratings create an excessive pressure drop across the filter. They can be so restrictive that the filter by-pass valve can open. With the by-pass valve open, unknown to you, no filtration will occur! To maximize filter performance, Moroso racing oil filters have a rating of 27 Microns, which produces a maximum initial restriction of only 2.5 PSI when tested to SAE J806! The result is less pressure drop, more flow, less oil by-pass and maximum filtration performance important in severe racing conditions.
Type: Canister
Color: Silver
Material: Steel Mesh
Height (IN): 5-1/4 Inch
Micron Rating: 27
Anti-Drain Back Valve: Yes
Filter Bypass Relief Valve: No
Gasket Material: Nitrile Rubber
Estimated Install Time (Hours): 0.25
Features
- Pleated Element Design Increases Filtering Area
- Roll Formed Threads For Precise, Tight Fit
- Buna-N Gasket Compatible With All Racing Fuels And Lubricants
- Extra Thick Back Plate Provides Added Protection Against Pressure Surges
- Anti Drainback Valve Keeps Oil In Filter After Engine Shut Down
- Filter Element Provides Maximum Flow With Minimal Pressure Drop
- Non Porous, Metal End Caps Prevent Unfiltered Oil To By-Pass. Extra Thick Housing With Tuck Seam Withstands Higher Burst Pressure
- Limited Supplier Warranty
| Specifications of Moroso Performance Oil Filter - 22470 | |
| Anti-Drain Back Valve | Yes |
| Color | Silver |
| Estimated Install Time (Hours) | 0.25 |
| Filter Bypass Relief Valve | No |
| Gasket Material | Nitrile Rubber |
| Height (IN) | 5-1/4 Inch |
| Material | Steel Mesh |
| Micron Rating | 27 |
| Type | Canister |
No questions found. Be the first?
Related Products
Authorized Dealer
Recently Viewed
Reviews for Moroso Performance Oil Filter - 22470(0)
There are no reviews for this product.