Hello, Sign inMy Account
Register Login
My Garage 0 Wishlist (0)
                                                                                                                                                                                         *** Attention: Current axle delivery time has decreased by Dexter to up to 6 weeks ***                                                                                                                                                                                         *** Attention: Current axle delivery time has decreased by Dexter to up to 6 weeks ***

Mishimoto Oil Cooler Line - MMSBH-RX8-04K

Brand: Mishimoto
0 reviews
  • Have a product question? Ask us
  • Part Number: MMSBH-RX8-04K
  • Part Location: U.S.
  • Availability: *Special Order
  • Delivery: Up to 2 Weeks
  • If purchased before 12:00 EDT - estimated delivery by July 17
Retail: $678.29
Price: $645.99
You Save: $32.30
Inlet Attachment Type
Hose Barb
Inlet Size
5/8 Inch
Length
2 Feet 4 Inch/ 4 Feet 8 Inch/ 3 Feet 4 Inch/ 2 Feet 2 Inch
Material
Stainless Steel
Outlet Attachment Type
Hose Barb
Outlet Size
5/8 Inch
Share this page

Mishimoto Oil Cooler Line

Oil Cooler Line; With 2 Feet 4 Inch Stainless Steel Braided Hose With -10AN Aluminum Fitting/ 4 Feet 8 Inch Stainless Steel Braided Hose With -10AN Aluminum Fitting/ 3 Feet 4 Inch Stainless Steel Braided Hose With -10AN Aluminum Fitting/ 2 Feet 2 Inch Stainless Steel Braided Hose With -10AN Aluminum Fitting/ Four M18 x -10AN Fittings/ Two M18 x -10AN Banjo Bolts/ 10AN to 10AN Male Connector/ Dowty Oil Seals

MPN: MSBHRX804K

The Mazda RX-8 has a high-winding rotary engine capable of easily reaching 9,000 RPMs on a daily basis. With those revs comes very high oil Temperatures. Most RX-8 models with manual transmissions were outfitted with dual oil coolers from the factory to keep the rotary engine’s oil at a safe temperature during high speed driving and track situations. Unfortunately, over time, the stock rubber RX-8 oil cooler lines and steel fittings can severely corrode and degrade over time. The most frequent RX-8 oil cooler line to corrode is located on the left hand side of the car near the front suspension assembly. The design of the vehicle and location of the line are apt to collect dirt and road salt from winter. With the Mishimoto replacement oil line, not only is this problematic line replaced, it’s replaced with a full braided stainless steel oil line and aluminum M18 to 10AN banjo fittings that will not corrode or break down over time. The Mazda RX-8 oil cooler line fits onto the vehicle with no additional modification, and does not require any cutting to your vehicle or permanent removal of parts. Keep your RX-8 protected and running smooth.
Inlet Size: 5/8 Inch
Inlet Attachment Type: Hose Barb
Outlet Size: 5/8 Inch
Outlet Attachment Type: Hose Barb
Length: 2 Feet 4 Inch/ 4 Feet 8 Inch/ 3 Feet 4 Inch/ 2 Feet 2 Inch
Material: Stainless Steel

Features

  • Premade Braided Stainless Steel Oil Lines And Aluminum Fittings Replace Corrosion-Prone Stock Rubber Lines
  • Oil Lines Come Prelabeled For Easy Identification
  • Fits Onto The Vehicle With No Additional Modification, And Does Not Require Any Cutting To Your Vehicle Or Permanent Removal Of Parts
  • Limited Lifetime Warranty
Specifications of Mishimoto Oil Cooler Line - MMSBH-RX8-04K
Inlet Attachment Type Hose Barb
Inlet Size 5/8 Inch
Length 2 Feet 4 Inch/ 4 Feet 8 Inch/ 3 Feet 4 Inch/ 2 Feet 2 Inch
Material Stainless Steel
Outlet Attachment Type Hose Barb
Outlet Size 5/8 Inch

2004 Mazda RX-8
2005 Mazda RX-8
2006 Mazda RX-8
2007 Mazda RX-8
2008 Mazda RX-8
2009 Mazda RX-8
2010 Mazda RX-8
2011 Mazda RX-8

Please login or register to ask, or continue as a Guest

Captcha
Click to refresh

No questions found. Be the first?

Reviews for Mishimoto Oil Cooler Line - MMSBH-RX8-04K(0)

There are no reviews for this product.

Write a review
Note: HTML is not translated!