Holley Performance Fuel Pump Electric - 12-3000-2
Estimated Install Time (Hours)
1
Free Flow Rate
335 Gallon Per Hour
Fuel Type
Alcohol/ E85/ Gasoline
Inlet Quantity
Dual
Inlet Size
10 AN
Maximum Pressure (PSI)
130 Pounds Per Square Inch
Mounting Style
In-Line
Outlet Size
10 AN
Voltage Rating
13.8 Volt
With Mounting Hanger
No
Share this page
Holley Performance Fuel Pump Electric
Fuel Pump Electric; Up To 4400 Horsepower EFI/ 4800 Horsepower Carburetor; 130 PSI Maximum Pressure; With Controller Dual; 10AN O-Ring Inlet/Outlet
MPN: 1230002
Holley set the bar in 2011 with the release of the HP and Dominator in-line fuel pumps. In 2015, Holley has raised the bar again with the introduction of the VR1 and VR2 Brushless in-line fuel pumps. Featuring brushless pump technology and a twin screw rotor design, the VR1 and VR2 in-line fuel pumps are capable of high pressures and flows while maintaining a low amperage draw and quiet performance. Designed to work on high boosted race cars as well as your daily driven weekend endurance car, these pumps work with gasoline, methanol, and E-85 and can maintain pressures of 130 PSI and up to 335 Gallons Per Hour flow.
Mounting Style: In-Line
Fuel Type: Alcohol/ E85/ Gasoline
Voltage Rating: 13.8 Volt
Free Flow Rate: 335 Gallon Per Hour
Maximum Pressure (PSI): 130 Pounds Per Square Inch
Inlet Quantity: Dual
Inlet Size: 10 AN
Outlet Size: 10 AN
With Mounting Hanger: No
Estimated Install Time (Hours): 1
Features
- Capable Of 130 PSI While Providing Significant Flow Forced Induction Application's Where Belt Driven Pumps Are Normally Used
- The Dual Pump Models Are Designed For Endurance Racing Where Both Pumps Are Used Or One Can Be A Reserve Pump
- Billet Aluminum Construction For Durability And Good Looks
- Features A Dual 10 AN O-Ring Inlet And A Single 10 AN O-Ring Outlet
- High Flow And High Pressure With Low Amperage Draw
- A Complete Line Of Fuel Filters And Fuel Pressure Regulators That Are Designed To Work As A System With These Pumps
- Unlike Other Pumps, The VR Series Are Built For Continuous Duty If Needed
- Can Be Fully Submerged In The Fuel Cell Or Chassis Mounted
- Limited 90 Day Supplier Warranty
| Specifications of Holley Performance Fuel Pump Electric - 12-3000-2 | |
| Estimated Install Time (Hours) | 1 |
| Free Flow Rate | 335 Gallon Per Hour |
| Fuel Type | Alcohol/ E85/ Gasoline |
| Inlet Quantity | Dual |
| Inlet Size | 10 AN |
| Maximum Pressure (PSI) | 130 Pounds Per Square Inch |
| Mounting Style | In-Line |
| Outlet Size | 10 AN |
| Voltage Rating | 13.8 Volt |
| With Mounting Hanger | No |
No questions found. Be the first?
Related Products
Reviews for Holley Performance Fuel Pump Electric - 12-3000-2(0)
There are no reviews for this product.
