FiTech Fuel Injection System - 30004
Aspiration
Nitrous Engines/ Supercharged/ Turbocharged
Fuel Injection Type
Throttle Body
Includes Calibration Module
Yes
Includes Distributor
No
Includes ECM
Yes
Includes Fuel Pressure Regulator
Yes
Includes Fuel Pump
No
Includes Fuel Rails
No
Includes Gaskets
Yes
Includes IAC Motor
Yes
Includes IAT Sensor
No
Share this page
FiTech Fuel Injection System
Fuel Injection System; Go EFI 4; For Use On Any 4 Barrel Intake Manifold; Use With Turbocharged/ Supercharged or Nitrous Engines; Throttle Body Injection; 600 Horsepower Rating; Matte Black; With Die Cast Throttle Body/ 4 Hi-Flow Injectors/ Handheld Controller/ Windshield Mount/ Built-In Pressure Regulator/ 2.5 Bar Internal MAP Sensor/ TPS/ Idle Air Control Sensor/ Coolant Temp Sensor/ O2 Bung/ 6AN Fuel Inlet/ Gasket Kit
MPN: 30004
The Go EFI 4 Power Adder 600 Horsepower is for the enthusiast that demands more from his system or is planning a future upgrade! This system is capable of 25 Pounds of boost right out of the box and can be used in a blow through turbo, blower application, or on a single roots style "draw through" supercharger. You can also run a single stage of wet nitrous, control your Air or Fuel, and ignition timing. Has all of the self tuning features you expect from the Go EFI systems with the extra PRO Features needed for higher output engines. Annular Swirl Discharge fuel distribution as well as Nitrous and Boost timing retard features make this a perfect choice for your Power Adder engine or your normally aspirated engine if you are considering future upgrades.
Aspiration: Nitrous Engines/ Supercharged/ Turbocharged
Fuel Injection Type: Throttle Body
Metering Type: Speed Density
Includes Intake Manifold: No
Intake Manifold Finish: No Intake Manifold
Intake Manifold Material: No Intake Manifold
Includes Fuel Rails: No
Throttle Body Finish: Matte
Throttle Body Material: Aluminum
Throttle Body Mounting Flange: 4-Barrel Square Bore
Venturi Quantity: 4
Includes Calibration Module: Yes
Includes ECM: Yes
Includes Wiring Harness: Yes
Includes Fuel Pump: No
Includes Fuel Pressure Regulator: Yes
Includes Distributor: No
Includes Oxygen Sensor: Yes
Includes TPS Sensor: Yes
Includes IAT Sensor: No
Includes MAP Sensor: Yes
Includes IAC Motor: Yes
Includes Gaskets: Yes
Features
- Boost Ready Throttle Body
- Nitrous Control With A Host Of Safety Features And Accessories For Nitrous Tuning
- Nitrous And Boost Specific Target Air Or Fuel Target Options
- Boost And Nitrous Timing Retard Strategies
- Air-Conditioning Idle Speed Input Kick Up
- Advanced Hand Held Tuning Mode Enabled
- 2 Fan Control (Can Set At Separate Temperatures)
- Limited 1 Year Warranty
Specifications of FiTech Fuel Injection System - 30004 | |
Aspiration | Nitrous Engines/ Supercharged/ Turbocharged |
Fuel Injection Type | Throttle Body |
Includes Calibration Module | Yes |
Includes Distributor | No |
Includes ECM | Yes |
Includes Fuel Pressure Regulator | Yes |
Includes Fuel Pump | No |
Includes Fuel Rails | No |
Includes Gaskets | Yes |
Includes IAC Motor | Yes |
Includes IAT Sensor | No |
Includes Intake Manifold | No |
Includes MAP Sensor | Yes |
Includes Oxygen Sensor | Yes |
Includes TPS Sensor | Yes |
Includes Wiring Harness | Yes |
Intake Manifold Finish | No Intake Manifold |
Intake Manifold Material | No Intake Manifold |
Metering Type | Speed Density |
Throttle Body Finish | Matte |
Throttle Body Material | Aluminum |
Throttle Body Mounting Flange | 4-Barrel Square Bore |
Venturi Quantity | 4 |
No questions found. Be the first?
Reviews for FiTech Fuel Injection System - 30004(0)
There are no reviews for this product.