ARB Differential Locker Compressor - CKMA12
Air Flow Rating
3.08 Cubic Feet Minute AT 0 Pound Per Square Inch To 2.34 Cubic Feet Minute AT 29 Pound Per Square
Ampere Rating (A)
13 Amp
Height (IN)
5.6 Inch
Includes Mounting Hardware
Yes
Includes Pressure Switch
Yes
Includes Tank
No
Length (IN)
3-13/16 Inch
Pressure Rating
29 Pound Per Square Inch
Type
On-Board
Voltage Rating (V)
12 Volt
Width (IN)
7-1/2 Inch
Share this page
ARB Differential Locker Compressor
Differential Locker Compressor; High Volume; 12 Volt; 3.08 CFM At 0 PSI To 2.34 CFM At 29 PSI; With Full Wiring Loom/ Air Filter/ Solenoid Plug In Contacts/ Mounting Hardware/ Isolating Switch; Permanently Mounted; 5-19/32 Inch High x 7-1/2 Inch Long x 3-13/16 Inch Wide
MPN: CKMA12
Permanently mounted, this compressor is installed into your truck and includes a full wiring loom with air locker solenoid plug in contacts, mounting hardware with reinforcing bracket and quality compressor isolating switch. This compressor, with the addition of ARB Pump-Up Kit can be used to activate air lockers, and can perform other functions such as inflating camping gear. So what makes this compressor special? It's small enough to fit into even the tightest space and quiet enough to mount in the cab. It has enough output to air up four 35 to 37 Inch tires in a single duty cycle and typically airs up a 35 Inch tire in just over 2 minutes. And, it works. We've tested this unit in ovens, freezers, underwater and in the silty dust of the Simpson Desert and it continues to perform.
Type: On-Board
Voltage Rating (V): 12 Volt
Ampere Rating (A): 13 Amp
Pressure Rating: 29 Pound Per Square Inch
Air Flow Rating: 3.08 Cubic Feet Minute AT 0 Pound Per Square Inch To 2.34 Cubic Feet Minute AT 29 Pound Per Square
Length (IN): 3-13/16 Inch
Width (IN): 7-1/2 Inch
Height (IN): 5.6 Inch
Includes Tank: No
Includes Pressure Switch: Yes
Includes Mounting Hardware: Yes
Features
- Sealed For Moisture And Dust Resistance. Relocatable Splash Resistant Air Filter Assembly For Cleaner, Cooler Air Supply
- Hard Anodized Cylinder Bore And Teflon Impregnated Carbon Fiber Piston Seal For Reduced Friction And Maximum Trouble Free Life. Motor Is Internally Thermal Protected Against Extreme Temperature Damage
- Anodized Mounting Bracket Dissipates Motor Heat And Allows Compressor To Be Repositioned 180 Degree. Includes Full Wiring Loom, Air Locker Solenoid Plug In Contacts And Quality Isolating Switch
- Heavy-Duty Maxi-Fuse Equipped For Professional In-Line Circuit Protection
- Quality Components For Quiet Operation And Extra Long Life
- Constructed Entirely Of Lightweight, High Strength Engineering Grade Materials
- Over-Pressure Safety Valve Equipped
- Limited 2 Year Warranty
| Specifications of ARB Differential Locker Compressor - CKMA12 | |
| Air Flow Rating | 3.08 Cubic Feet Minute AT 0 Pound Per Square Inch To 2.34 Cubic Feet Minute AT 29 Pound Per Square |
| Ampere Rating (A) | 13 Amp |
| Height (IN) | 5.6 Inch |
| Includes Mounting Hardware | Yes |
| Includes Pressure Switch | Yes |
| Includes Tank | No |
| Length (IN) | 3-13/16 Inch |
| Pressure Rating | 29 Pound Per Square Inch |
| Type | On-Board |
| Voltage Rating (V) | 12 Volt |
| Width (IN) | 7-1/2 Inch |
No questions found. Be the first?
Related Products
Authorized Dealer
Authorized Dealer
Authorized Dealer
Authorized Dealer
Authorized Dealer
Authorized Dealer
Authorized Dealer
Authorized Dealer
Authorized Dealer
Authorized Dealer
Authorized Dealer
Reviews for ARB Differential Locker Compressor - CKMA12(0)
There are no reviews for this product.
